Equipment for melting bitumen powder Termobit 5000
Produce and assemble turnkey melter "Termobit 5000" powder to melt bitumen (bitumen aggregate and bitumen in powder form).
Melting chamber "Termobit 5000" may be used in enterprises engaged in processing a soft bituminous roofing waste (old roofing material) and produces powder bitumen (bitumen crumb mastic bitumen primer).
Performance melting chamber "Termobit 5000" may be designed in a large range in agreement with the customer.
Melting chamber "Termobit 5000" is a housing with double walls, the bottom, the heating of which is done in special channels circulating thermal oil (dialkyl), filed on the thermo-insulated pipe preheated to 160 degrees in Thermal boiler. All parameters of the tracks industrial controller in the control cabinet.
Thermal oil boiler is a device for heating the thermal oil has two chambers (furnace chamber and afterburning flue gases). The boiler body is made of a boiler steel, internal furnace wall, and gases afterburning burner made of heat resistant steel. Supplied with the boiler flue, a heat exchanger for removing heat management in order to heat and hot water, the flue gas treatment system (based on incremental. Request), the tanks for thermal expansion, high temperature pump. Used as fuel wood, briquette, combustible debris bitumizirovanny cardboard, roofing waste. The presence system of afterburning flue gases and smoke emission purification system to atmosphere meet environmental standards.
Gases formed in the chamber during the melting of the powder through the tube vented to the atmosphere, after passing through the cleaning scrubber (gas cleaner). Most of the flue gases fed into thermal oil boiler for combustion and generate heat energy.
Loading the powder into the melting chamber "Termobit 5000" produced by using a belt conveyor through a lock dispenser. To supply the bitumen powder in another way it is possible to change the design of the equipment according to customer requirements (to integrate the camera into existing melting bitumen production of bitumen powder or pouring asphalt mastic).
For continuous operation of the melting chamber "Termobit 5000" and uniform heating of the bitumen, bituminous powder is supplied to the chamber for a given industrial controller program that manages all the hardware nodes (dispenser sluice feeder, a stirring device, the level of the control part of bitumen in the chamber, a safety valve, bituminous crane etc.).
Stirring liquid bitumen produced special stirring device, which is a blade, moving longitudinally along the chamber at different levels. mixing apparatus is also used for discharging mineral precipitate. The operation of the mixer bitumen industrial controller controls for a given program.
Draining heated molten bitumen from the container is made in two bituminous crane located on different levels. This makes it possible not to wait for the complete settling of the mineral sediment, and depending on the indication device level tracking liquid bitumen, part of the asphalt (upper layer) was pumped into the mixing tank for producing a waterproof mastic or container for the production of briquettes from coal tar.
Unloading mineral sludge produced through a side discharge hatch.
There are technological hatches for cleaning the inner walls of the chamber bitumen melting chamber.
To be able to manufacture a waterproofing bituminous mastic equipment for melting of the powder bitumen "Termobit 5000" can be additionally equipped with a bitumen pump, a mixing tank (with a stirrer, heated walls, the weight measurement system of the bitumen). You can connect to a mixing tank of a colloid mill.
Write us a request and we will answer your questions.